GORGO Purifiers

The GORGO Purifier is manufactured entirely in AISI 316 stainless steel with titanium and is resistant to high temperatures and to corrosive sulphurous compounds, which are present in the exhaust fumes. The GORGO consists of a horizontal cylindrical body (diameter varies depending on engine size) which makes up the water container, two brackets for fixing the purifier, and a cylindrical tower situated in the upper part of the water holder containing a separator. The fumes are conveyed through an entry tube to the interior of the purifier and passed in fine bubbles through the water. The carbonaceous particles become heavier on contact with the water and fall to the bottom of the water chamber. The gases are then directed towards the separator, which recovers the droplets of water present in the gases as they pass out, and captures the carbon particles which precipitate out of the water. The white smoke discharged from the exhaust chimney is thus composed mainly of water vapour.

purifiers

The principal problem of Diesel engines is the black smoke emission, which is both undesirable and acts an irritant. The GORGO purifier uses water to purify diesel exhaust fumes by approx. 85% by utilising a special washing system which Bersy have developed and employed in the GORGO Purifier. In addition to purification, the GORGO purifier also reduces the temperature of exhaust fumes, which thus avoids the transformation of Nitrogen Oxide to toxic Nitrogen Dioxide. The GORGO Purifier also acts as a silencer and spark arrestor (even in the event of absence of water).

Bersy is Italy's leader in water-based purifiers, catalysts, and adheres to guidelines concerning exhaust gas reduction issued by the Experimental Station for Combustibles in Milan. As a result, Bersy is in a position to attest to the efficiency of its products.